Power Plastics UHMW-PE wear strips are the ideal wearing surface for non- metallic and metallic wear shoes. These corrosion resistant strips lower friction, reduce noise, and allow flight to run smoothly in a rectangular clarifier, reducing wear on flight shoes. Easy to install with weld washers for tee-rail, concrete floors, or return track, Power Plastics UHMW-PE wear strips make systems more energy efficient. These wear rails have a low coefficient of friction which enables them to not absorb water or swell, and yield longer system life. Beveled ends and slotted holes allow for thermal expansion during down time. Power Plastic wear strips are available in a variety of widths and thicknesses, in virgin grade and reprocessed UHMW-PE. See wear strip assembly sheets for mounting options.
| P/N | Thickness | Width | Length | Center Line |
|---|---|---|---|---|
| WTFW06-042 | 3/8" | 2-5/8" | 120” | 1-5/16" |
| WTFW06-048 | 3/8" | 3" | 120” | 1-1/2" |
| WTFW08-040 | 1/2" | 2-1/2" | 120” | 1-1/4" |
| WTFW08-048 | 1/2" | 3" | 120” | 1-1/2" |
| WTFW08-056 | 1/2" | 3-1/2" | 120” | 1-3/4" |
| WTFW08-064 | 1/2" | 4" | 120” | 2" |
| WTFW08-080 | 1/2" | 5" | 120” | 2-1/2" |
| WTFW10-040 | 5/8" | 2-1/2" | 120” | 1-1/4" |
| WTFW10-048 | 5/8" | 3" | 120” | 1-1/2" |
| WTFW10-064 | 5/8" | 4" | 120” | 2" |
| WTFW10-080 | 5/8" | 5" | 120” | 2-1/2" |
| P/N | Thickness | Width | Length | Center Line |
|---|---|---|---|---|
| WTSW06-042 | 3/8" | 2-5/8" | 120” | 1-5/16" |
| WTSW06-048 | 3/8" | 3" | 120” | 1-1/2" |
| WTSW08-040 | 1/2" | 2-1/2" | 120” | 1-1/4" |
| WTSW08-048 | 1/2" | 3" | 120” | 1-1/2" |
| WTSW08-056 | 1/2" | 3-1/2" | 120” | 1-3/4" |
| WTSW08-064 | 1/2" | 4" | 120” | 2" |
| WTSW08-080 | 1/2" | 5" | 120” | 2-1/2" |
| WTSW10-040 | 5/8" | 2-1/2" | 120” | 1-1/4" |
| WTSW10-048 | 5/8" | 3" | 120” | 1-1/2" |
| WTSW10-064 | 5/8" | 4" | 120” | 2" |
| WTSW10-080 | 5/8" | 5" | 120” | 2-1/2" |
© 2026 Power Plastics. All Rights Reserved.
